LEORX Brake Fluid Tester Vehicle Testing Tool with 5 LED Indicator for Auto Automotive Car

£9.45 (as of June 18, 2018, 12:18 am)

What to do

Usually dispatched within 1-2 business days

Quantity

What to do

1. Turn on the brake fluid tester by pressing the button. A green light will have to remove darkness from. If the light does not come on, it can be time to change a battery.
2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester.
3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid.
4. After testing, needless to say to screw the lid of the brake fluid reservoir back on tightly.
5. The tester will routinely power off after 12 seconds of inaction.

The LED lights will indicate the percentage of water in the brake fluid:
– Green: None.
– Green/Yellow: Lower than 1%.
– Green /Yellow/Yellow: Approx. 2%.
– Green/Yellow/Yellow/Red: Approx. 3% (Time to change brake fluid.).
– Green/Yellow/Yellow/Red/Red: Approx. 4% (Change brake fluid straight away!).

Please note
– This brake fluid tester is calibrated for DOT 4 brake fluid only, which is used in most cars produced since 2006.
– Replace the battery if the green LED light no longer lights up after you press the button.
– Wash the test probe with tap water after each use.
– In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water.
– Do not expose brake fluid to the atmosphere for a very long time as it is highly hygroscopic.

Package Including
1 * Car Brake Fluid LED Tester Detector (Black)
1. Turn on the brake fluid tester by pressing the button. A green light will have to remove darkness from. If the light does not come on, it can be time to change a battery.
2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester.
3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid.
4. After testing, needless to say to screw the lid of the brake fluid reservoir back on tightly.
5. The tester will routinely power off after 12 seconds of inaction.

Binding

Brand

EAN

EANList

ItemDimensions

Label

Manufacturer

MPN

PackageDimensions

PackageQuantity

PartNumber

ProductGroup

ProductTypeName

Publisher

Studio

UPC

UPCList